Skip to the beginning of the images gallery

Global TTC 1 & 2 Wire Braid Steel Crimp Fitting, 3/4-14 Male NPT, -12 Hose, Straight

Application General purpose low and medium pressure hydraulics. Use H277 or H435 where shock hazards exist	D 1.65	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 1.00	UOM EA	End Gender 1 13554	End Size 1 0.75	End Size 2 0.75	End Type 1 NPTF	End Type 2 Line/Hose/Tube	Hex Size 2 1.38	Hose Size -12	Mandrel Required No	Supplier Part Number 1AA12MP12	Thread 1 3/4-14	Thread Sealant No	Alternate Part Numbers Alternate Part Number C1AP56, Alternate Part Number MI-00302076, Alternate Part Number MINO-00015F50818	Product Weight 0.41 lbs

Product Questions & Answers 4

Product Questions & Answers

trying to swap out a fitting on a -12 hose. is this the straight male pipe end with 3/4-14 threads?

Question by: Harold J on Aug 31, 2025, 3:11 PM

You are looking at a straight male NPTF pipe end with 3/4-14 threads on one side, and it crimps onto a -12 hose on the other side.

Answer by: Customer Support on Sep 1, 2025, 3:26 PM

fitting says it works with -12 hose, but do I need any kind of sealant on them NPT threads to get a good seal?

Question by: Diane P on Oct 9, 2025, 11:15 AM

NPTF threads on this fitting are cut to a tighter tolerance than standard NPT, and that's what allows them to seal without thread sealant or tape. The thread form itself creates the seal through metal-to-metal contact when torqued properly. Standard NPT threads usually need sealant to compensate for the spiral leak path, but NPTF eliminates that. So no, nothing extra needed on the threads for a proper connection.

Answer by: Customer Support on Oct 11, 2025, 6:30 AM

got a -12 hose i need to crimp, is this the right end for 3/4-14 male pipe threads?

Question by: Shawn W on Jul 18, 2025, 3:47 PM

For a straight male pipe connection, this fitting matches a 3/4-14 Male NPT end on the threaded side and a -12 hose size on the crimp side.

Answer by: Customer Support on Jul 20, 2025, 6:20 AM

Will this fitting hold up okay in a hydraulic system that sees some pretty good pressure swings?

Question by: Judy P on May 2, 2025, 2:30 PM

Designed for general purpose low and medium pressure hydraulic applications, this fitting should work well. It's made with a durable steel construction.

Answer by: Customer Support on May 4, 2025, 11:50 AM

Similar Products

Model Number	Thread 1	Hose Size	D
1AA16MP16	1-11-1/2	-16	1.86
1AA4MP4	1/4-18	-04	1.14
1AA6MP6	3/8-18	-06	1.28
1AA6MP8	3/8-18	-08	1.32
1AA8MP8	1/2-14	-08	1.57
1AA12MP10	3/4-14	-10	1.4
1AA12MP12	3/4-14	-12	1.65
1AA12MP16	3/4-14	-16	1.67
1AA12MP8	3/4-14	-08	1.39
1AA24MP24	1-1/2-11-1/2	-24	2.36
1AA2MP4	1/8-27	-04	0.92
1AA32MP32	2-11-1/2	-32	2.61
1AA4MP6	1/4-18	-06	1.18
1AA4MP8	1/4-18	-08	1.23
1AA6MP4	3/8-18	-04	0.98
1AA8MP10	1/2-14	-10	1.58
1AA8MP12	1/2-14	-12	1.6
1AA8MP6	1/2-14	-06	1.28
1AA16MP12	1-11-1/2	-12	1.61
1AA20MP16	1-1/4-11-1/2	-16	1.72