Skip to the beginning of the images gallery

Global TTC 1 & 2 Wire Braid Steel Crimp Fitting, M26 x 1.5 Female German DIN 3902 24 deg Flare Light Duty Swivel, -10 Hose, 45 deg Elbow

Application General purpose low and medium pressure hydraulics. Use H277 or H435 where shock hazards exist	D 59	Drop Dimension 0.87	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 1.00	UOM EA	End Gender 1 13553	End Size 1 1	End Size 2 0.63	End Type 1 Metric	End Type 2 Line/Hose/Tube	H 27.5 mm	Hose Size -10	Mandrel Required No	Supplier Part Number 1A16DLA10	Thread 1 M26 x 1.5	Thread Sealant No	Torque Rating 81-96 LB/FT	Torque Rating 81-96 LB/FT	Alternate Part Numbers Alternate Part Number C1AN22, Alternate Part Number MI-03065190, Alternate Part Number MINO-00015J51541	Tube O.D. 18	Product Weight 0.43 lbs

Product Questions & Answers 5

Product Questions & Answers

got a -10 hose and need a 45 elbow with a metric female swivel, is this the one with M26 x 1.5 threads?

Question by: Phil H on Nov 29, 2025, 6:19 AM

For a -10 hose setup, it matches that combination: a 45 degree elbow crimp fitting with an M26 x 1.5 female German DIN 3902 24 degree flare light duty swivel end.

Answer by: Customer Support on Nov 30, 2025, 5:25 PM

fixing up a rig that takes a lot of hard knocks and pressure spikes. are these fittings rated to handle heavy shock loads

Question by: Neal M on May 25, 2025, 6:20 PM

Sudden pressure spikes require a different setup. General purpose low and medium pressure applications are the intended use for these TTC fittings. You need to run H277 or H435 hose options if shock hazards exist in your system.

Answer by: Customer Support on May 27, 2025, 8:32 AM

what hoses does this fitting actually work with, and is there something specific I'm supposed to use if there's shock hazards on the line?

Question by: Lee A on Mar 4, 2026, 6:02 PM

For general low and medium pressure hydraulic use, this fitting is compatible with H277 and H435 hoses. When shock hazards are present in the system, H277 or H435 are the ones you want to go with. Both are within scope for this fitting's intended application range.

Answer by: Customer Support on Mar 6, 2026, 4:38 PM

trying to swap out an old crimp end, is this one the M26 x 1.5 female swivel with the 24 degree DIN light flare?

Question by: Dwayne G on Sep 20, 2025, 6:12 PM

The key identifiers on this part are the Thread 1 size of M26 x 1.5, the female German DIN 3902 24 degree flare light duty swivel end, and the 18 mm tube O.D. it matches. It is also a 45 degree elbow, so the angle needs to match what you are replacing.

Answer by: Customer Support on Sep 22, 2025, 6:30 AM

Will this fitting hold up in a hydraulic system on a tractor, or is it more for lighter-duty stuff?

Question by: Travis D on Nov 21, 2025, 6:22 AM

Designed for general-purpose low and medium pressure hydraulic applications, this fitting should work well for your tractor's hydraulic system as long as the pressure requirements are within its specified range. It's best suited for applications where shock hazards exist, and it's compatible with H277 or H435 hoses.

Answer by: Customer Support on Nov 23, 2025, 6:43 AM

Similar Products

Model Number	Thread 1	Tube O.D.	Hose Size	D	H
1A16DLA10	M26 x 1.5	18	-10	59	27.5 mm
1A10DLA6	M18 x 1.5	12	-06	44.5	20.5 mm
1A12DLA8	M22 x 1.5	15	-08	52	21.5 mm
1A6DLA4	M14 x 1.5	8	-04	39	17.5 mm
1A8DLA6	M16 x 1.5	10	-06	41.5	19 mm