Skip to the beginning of the images gallery

Global TTC 1 & 2 Wire Braid Steel Crimp Fitting, M18 x 1.5 Female German DIN 3902 24 deg Flare Light Duty Swivel, -06 Hose, Straight

Application General purpose low and medium pressure hydraulics. Use H277 or H435 where shock hazards exist	D 25.90	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 1.00	UOM EA	End Gender 1 13553	End Size 1 0.63	End Size 2 0.38	End Type 1 Metric	End Type 2 Line/Hose/Tube	Hose Size -06	Mandrel Required No	Supplier Part Number 1A10DL6	Thread 1 M18 x 1.5	Thread Sealant No	Torque Rating 37-44 LB/FT	Torque Rating 37-44 LB/FT	Alternate Part Numbers Alternate Part Number C1AM77, Alternate Part Number MI-01658325, Alternate Part Number MINO-00015J21055	Tube O.D. 12	Product Weight 0.17 lbs

Product Questions & Answers 4

Product Questions & Answers

what do i torque these down to? putting some on my -06 hoses and just wanna get it right

Question by: Lance H on Apr 27, 2025, 6:21 AM

Tighten the fitting to a torque rating of 37 to 44 foot-pounds to ensure a proper connection.

Answer by: Customer Support on Apr 28, 2025, 10:46 AM

What kind of hydraulic applications is this fitting good for?

Question by: Billy E on Oct 19, 2025, 1:16 PM

It’s made for general-purpose hydraulic systems with low to medium pressure. You could use it with H277 or H435 hoses in places where there might be shock hazards.

Answer by: Customer Support on Oct 21, 2025, 11:05 AM

got a -06 hose and need a straight swivel end, is this the one with the M18 x 1.5 female DIN 24 degree light duty flare?

Question by: Sheila W on Nov 8, 2025, 12:44 PM

For a -06 hose, this fitting matches an M18 x 1.5 female German DIN 3902 24 degree flare in a light duty swivel, and it’s a straight configuration. It’s also listed with a 12 mm tube outer diameter for the DIN flare side.

Answer by: Customer Support on Nov 9, 2025, 4:39 PM

fitting says it works with H277 or H435 hose, does that mean it won't crimp onto other hose types?

Question by: Dale C on Feb 21, 2026, 9:20 AM

For general low and medium pressure hydraulic applications, this fitting is rated for standard use across compatible hose configurations. The H277 and H435 hose callout is specifically for situations where shock hazards are present. Those two hose types are the recommended choice in those conditions, not the only hose this fitting works with overall. Just make sure whatever hose you're running is a -06 size, since that's what this fitting is built around.

Answer by: Customer Support on Feb 22, 2026, 12:05 PM

Similar Products

Model Number	Thread 1	Tube O.D.	Hose Size	D
1A20DL12	M30 x 2	22	-12	32.3
1A10DL6	M18 x 1.5	12	-06	25.9
1A12DL8	M22 x 1.5	15	-08	28.6
1A16DL10	M26 x 1.5	18	-10	29.8
1A25DL16	M36 x 2	28	-16	33.8
1A40DL24	M52 x 2	42	-24	40.9
1A5DL4	M12 x 1.5	6	-04	24.6
1A6DL4	M14 x 1.5	8	-04	22.6
1A8DL4	M16 x 1.5	10	-04	24.9
1A8DL6	M16 x 1.5	10	-06	31.6