X-FLEX SAE 100R13 High Pressure Hose, 2.86 Inch OD, 2.00 Inch ID, Up To 5076.00 PSI

This hose is intended for high-pressure hydraulic systems using either petroleum-based or water-based fluids. General industrial applications are also suitable.

Cold weather performance is one of this hose's stronger points. The lower temperature limit is -40°F, so operation through harsh winter conditions falls well within its rated range. The inner tube is synthetic rubber and the cover is the Dura-Tuff rubber formulation, both of which are suited to maintain flexibility at those low temperatures. For petroleum and water-based hydraulic fluids in cold-weather service, it was built with exactly that kind of environment in mind.

For the -32 size, the minimum bend radius is 18.75 inches. Staying at or above that radius helps keep the hose from being forced into a kinked bend.

At a 2-inch ID, this hose is rated to handle up to 5,076 PSI, so you've got solid headroom above 4,500. The multi-spiral wire reinforcement, either 4 or 6 heavy spiral wires depending on the size, is what gives it that pressure capacity without sacrificing flexibility. The minimum bend radius is 18.75 inches, so just plan your routing with that in mind and you won't have any issues on the pressure side.