Wildcat Sandblast Hose, 2.16 Inch OD, 1.25 Inch ID, Up To 125.00 PSI

For sizing, it has a 1.25 inch inside diameter and a 2.16 inch outside diameter, so it matches a 1-1/4 inch ID requirement and gives you the OD you need for couplings that grab the outside of the hose.

Sandblast couplings that attach to the outside diameter of the hose work well with this Wildcat hose.

Rated from -40°F up to 158°F, so cold weather shouldn't be a problem for most outdoor work. The natural rubber tube and SBR cover hold up across a wide range, and -40°F gives you a good amount of headroom even in harsh winter conditions.

For routing and handling, the minimum bend radius on this hose is 5.31 inches. That gives you a clear limit for how tight you can curve it without kinking or stressing the construction.

This hose is designed for use with sandblast couplings that attach to the outside diameter.

For most shop-level sandblasting on steel, 125 PSI is right in the working range. This hose is rated up to 125 PSI and carries a 1.25 inch inner diameter, which gives you good media flow for surface prep work before painting or sealing. The natural rubber tube and 4-ply textile reinforcement are built to hold up under abrasive conditions, so it handles the wear that comes with moving sand or shot through it regularly.