Wildcat Sandblast Hose, 1.50 Inch OD, 0.75 Inch ID, Up To 150.00 PSI

Rated from -40°F up to 158°F, so cold weather shouldn't be a problem for most outdoor work. The natural rubber tube and SBR cover hold up well across that range without getting stiff or brittle in low temps.

Sandblast couplings designed to attach to the outside diameter of the hose are recommended for secure and effective connections.

For sizing, the inside diameter is 0.75 inch and the outside diameter is 1.50 inch, so it matches a 3/4 inch ID sandblast hose with a 1.50 inch OD.

This Wildcat sandblast hose is rated for up to 150 PSI, so it should be able to handle a good amount of pressure for your sandblasting needs.

The inner diameter on this one runs 3/4 inch, and yes, it's rated up to 150 PSI. That combination works well for standard sandblasting setups where you need solid pressure without going to a larger bore. The outer diameter measures 1.5 inches, so factor that in when you're routing it through tight spots or selecting fittings.