Global TTC 1 & 2 Wire Braid Steel Crimp Fitting, 7/16-24 Male SAE Inverted Flare, -04 Hose, 90 deg Elbow

For fit confirmation, it matches a 7/16-24 male SAE inverted flare on the thread end and it crimps onto a -04 hose on the other side. It is a 90 degree elbow style, so the outlet turns at a right angle.

This Aeroquip TTC steel crimp fitting is designed for general-purpose, low- to medium-pressure hydraulic systems. If your tractor's hydraulics fall within that pressure range, and you're using either H277 or H435 hoses, it should be compatible.

Those two hose types, H277 and H435, are specifically called out for applications where shock hazards are a concern. The fitting itself is built for general purpose low and medium pressure hydraulic lines, so the hose compatibility really comes down to matching the -04 hose size and the crimp spec. The H277 and H435 callout is more of a safety-condition recommendation than a hard exclusion for every other hose. That said, only use hose types you can confirm are rated for this fitting's crimp spec.