Skip to the beginning of the images gallery

Global TTC 1 & 2 Wire Braid Steel Crimp Fitting, M16 x .5 Female German DIN 3902 24 deg Flare Heavy Duty Swivel, -04 Hose, 90 deg Elbow

Application General purpose low and medium pressure hydraulics. Use H277 or H435 where shock hazards exist	Drop Dimension 1.13	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 1.00	UOM EA	End Gender 1 13553	End Size 1 0.31	End Size 2 0.25	End Type 1 Metric	End Type 2 Line/Hose/Tube	Hose Size -04	Mandrel Required No	Seal Part if Included 05.017-6.5x1.5	Supplier Part Number 1A5DSB4	Thread 1 M16 x .5	Thread Sealant No	Torque Rating 33-40 LB/FT	Torque Rating 33-40 LB/FT	Alternate Part Numbers Alternate Part Number C1AN69, Alternate Part Number MI-03592266, Alternate Part Number MINO-00015X34831	Tube O.D. 8	Product Weight 0.13 lbs

Product Questions & Answers 1

Product Questions & Answers

fitting's got a 90 degree elbow on it, will that work alright on a -04 hose without needing any thread tape or sealant put on it?

Question by: Curt R on Dec 25, 2025, 10:07 AM

No sealant or thread tape needed on this one. The M16 x .5 female swivel uses a 24-degree DIN flare seat to make the seal, and the included 05.017-6.5x1.5 seal part handles leak prevention at the connection. Just get your torque in the 33 to 40 lb/ft range and you're good. It's also a crimp-style fitting, so no mandrel is required during installation either.

Answer by: Customer Support on Dec 26, 2025, 1:47 PM

Similar Products

Model Number	Thread 1	Tube O.D.	Hose Size	D	H
1A10DSB6	M22 x 1.5	14	-06	38.5	42 mm
1A12DSB8	M24 x 1.5	16	-08	44	49 mm
1A16DSB10	M30 x 2	20	-10	52.6	53.5 mm
1A20DSB12	M36 x 2	25	-12	62.8	64.5 mm
1A5DSB4	M16 x .5	8	-04
1A6DSB4	M18 x 1.5	10	-04	31	33.5 mm
1A6DSB6	M18 x 1.5	6	-06
1A8DSB6	M20 x 1.5	12	-06	35	35 mm