The source for all your fluid power needs. Solutions. Period.

Toggle Nav
Cart
Search
main product photo

Global TTC 1 & 2 Wire Braid Steel Crimp Fitting, 1.75 Inch SAE Code 61 Split Flange, -16 Hose, 45 deg Elbow

Ask A Question
Application
General purpose low and medium pressure hydraulics. Use H277 or H435 where shock hazards exist
D
3
Drop Dimension
1.06
Brand
Danfoss Power Solutions (II LLC Aeroquip)
Brand
Aeroquip
Pack Size
1.00
UOM
EA
End Gender 1
13553
End Size 1
1
End Size 2
1
End Type 1
Flanged
End Type 2
Line/Hose/Tube
Flange Head Dia.
1.75
H
1.06 in
Hose Size
-16
Mandrel Required
No
Supplier Part Number
1A16FLA16
Thread Sealant
No
Alternate Part Numbers
Alternate Part Number C1AN30, Alternate Part Number MI-00304338, Alternate Part Number MINO-00015F53185
Product Weight
0.92 lbs
Product Questions & Answers 5

Product Questions & Answers

got a -16 hose and need a 45 elbow with a 1.75 split flange, is this the right crimp end?
Question by: Peggy C on Jun 16, 2025, 8:08 PM
Match it up by the key sizes: it’s a steel crimp fitting built for -16 hose, with a 45 degree elbow and a 1.75 inch SAE Code 61 split flange female end.
Answer by: Customer Support on Jun 17, 2025, 8:55 PM
putting this on a loader that gets a lot of line shock. is it gonna hold up alright
Question by: Gary M on Jun 28, 2025, 8:20 AM
Shock hazards actually require a different setup. For applications dealing with heavy pressure spikes or shock, you will need to use H277 or H435 options instead. Those TTC steel crimp fittings are meant specifically for general purpose low and medium pressure hydraulic systems without those hazards.
Answer by: Customer Support on Jun 30, 2025, 6:36 AM
Trying to swap out a fitting on a -16 hose, is this one the 45 degree elbow with the 1.75 inch SAE Code 61 split flange?
Question by: Ross H on Nov 3, 2025, 4:20 PM
It matches a -16 hose and uses a 1.75 inch SAE Code 61 split flange on the female end, and the body is a 45 degree elbow.
Answer by: Customer Support on Nov 5, 2025, 7:51 AM
Will this fitting hold up for general hydraulic use on my tractor?
Question by: Larry R on Apr 13, 2025, 11:16 AM
This Danfoss TTC steel crimp fitting is designed for general-purpose low and medium-pressure hydraulics, so it should work fine on a tractor, particularly where there might be shock hazards. Just make sure your system is within its pressure rating.
Answer by: Customer Support on Apr 15, 2025, 8:47 AM
does this fitting work without needing a mandrel during install, or do i need special tooling to get it seated right?
Question by: Gary H on May 1, 2025, 7:06 PM
No mandrel is required for installation, which cuts down on the equipment you need on hand and speeds up the process considerably. Thread sealant is also not needed, so you can get the connection made without extra prep steps. It's a steel crimp fitting, so a standard crimp tool compatible with 1 and 2 wire braid hose is what you're working with.
Answer by: Customer Support on May 3, 2025, 1:30 PM

Similar Products

Model Number Flange Head Dia. Hose Size D H Price Buy Now
1A16FLA12 1.75 -12 2.97 1.06 in
1A16FLA16 1.75 -16 3 1.06 in
1A32FLA32 2.81 -32 5.52 2 in
1A12FLA12 1.5 -12 2.48 1.01 in
1A20FLA16 2 -16 3.45 1.15 in
1A24FLA24 2.38 -24 4.25 1.41 in