Tie Rod Hydraulic Cylinder, 3.00 Inch Bore, 1.50 Inch Rod Diameter, 18.00 Inch Stroke, 1/2 NPT Ports

At 2500 PSI working pressure, the rated load on this cylinder comes out to 17,600 pounds. That's a solid push for log splitting work. The rods are induction hardened and chrome plated, and every unit goes through both static and dynamic pressure testing before it ships, so you're not rolling the dice on consistency. One thing worth knowing for longer strokes in general: full extension ratings can be lower than retracted ratings due to column loading, so if you're running it pinned out at full extension under heavy load, factor that into your setup.

This hydraulic cylinder is 100% tested through both static and dynamic pressure tests, which ensures it should perform reliably in demanding industrial environments. The heavy-duty Grade 8 components and induction-hardened, chrome-plated rods also contribute to its robustness.

For fit-up, the key numbers are a 3.00 inch bore, 1.50 inch rod, and an 18.00 inch stroke. Mounting length is 28.25 inches pin to pin when retracted and 46.25 inches pin to pin when extended, with 1.00 inch pin diameter. Ports are 1/2 NPT.