Steel Reusable 1 Wire Braid Reduced Bore Two-Piece Fitting, 7/16-20 Female JIC 37 deg Flare Swivel, -05 Hose, Straight

Designed specifically with a 37-degree JIC flare swivel, this fitting should be compatible with any standard JIC flare connection.

For a -05 hose paired with a 7/16-20 female JIC 37 degree flare swivel, yes, that's exactly what this fitting covers. It's a two-piece reusable design, so you're working with a shell and nipple that go on separately rather than a crimp-style assembly. The swivel end lets you make up the JIC connection without twisting the hose, which saves a lot of grief during installation.

This fitting is specifically designed for use with -05 hoses, ensuring a secure and leak-proof connection. It's a direct fit if you're already using that size.

The key callouts on this part are a 7/16-20 female JIC 37 degree flare swivel end and it’s built for a -05 hose. If your hose is truly -05 and you’re mating to a 7/16-20 JIC 37 flare male, this matches those connection details.

Reduced bore fittings do carry a smaller internal diameter than full bore versions, so yes, there is some flow restriction built into the design. The end sizes on this one are 0.4375 on the connection side and 0.3125 through the bore. For most -05 hose applications that aren't pushing extreme flow rates, that's a workable tradeoff. Where it matters most is in high-flow or velocity-sensitive circuits, so just make sure your system's flow requirements are within range for those dimensions before committing.