Steel Reusable 1 Wire Braid Reduced Bore Two-Piece Fitting, 2-1/2-12 Female JIC 37 deg Flare Swivel, -32 Hose, Straight

Reduced bore fittings do restrict flow somewhat compared to a full bore design at the same hose size. For most standard hydraulic circuits that's not a problem, but if you're running a high-flow application where pressure drop across the fitting matters, it's worth factoring that in before you commit to this one. The tradeoff is that the two-piece reusable design makes field replacement a lot easier without needing a crimp press.

You are looking at a straight, female SAE 37 degree JIC flare swivel end with a 2-1/2-12 thread, and it is sized for a -32 hose.

Yes, this steel fitting is specifically designed for one-wire braid hoses, making it a reliable choice for your hydraulic system.

You’re looking at a straight, two-piece reusable steel fitting made for -32 hose, with a female JIC 37 degree flare swivel end. The thread on the swivel side is 2-1/2-12, and the hex size is 2.44.

This fitting is indeed designed for a -32 hose size. It’s part of the Danfoss/Eaton 411 Series and should provide a secure connection for your application.