Steel Reusable 1 Wire Braid Reduced Bore Three-Piece Fitting, 1-7/8-12 Female JIC 37 deg Flare Swivel, -24 Hose, Straight

This steel reusable fitting is designed for systems using one-wire braid hose, so it should handle that pressure without issue, assuming your hose is also rated for it.

It matches a -24 hose end with a 1-7/8-12 female JIC 37 degree flare swivel, and it is a straight configuration.

Reduced bore fittings do flow slightly less than a full bore version of the same hose size, yes. The bore is narrowed down from the standard -24 inner diameter, which keeps the fitting compact and structurally sound for its application. For most hydraulic circuits this isn't a problem, but if your system is already running tight on flow margins or pressure drop is a concern at that line size, it's worth accounting for that difference when you're sizing things out.