Skip to the beginning of the images gallery

Steel Adapter, 7/8-14 Male JIC 37 deg Flare To 7/8-14 Male JIC 37 deg Flare, 90 deg Elbow

A 1.45	Alternate Part Numbers Alternate Part Number C1AY15, Alternate Part Number MI-00313588, Alternate Part Number MINO-00015F62202	Application Marine/Military, Chemical Processing, Pulp and Paper Industries, Food and Beverage Processing, Off-Shore Drilling	B 1.45	Drop Dimension 1.45	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 1.00	UOM EA	End Gender 1 13554	End Gender 2 13556	End Size 1 0.88	End Size 2 0.88	End Type 1 SAE 37	End Type 2 SAE 37	Minimum Working Temperature -65	Supplier Part Number 2039-10-10S	Thread 1 7/8-14	Thread 2 7/8-14	Thread Sealant No	Tube O.D. 0.63	Tube O.D. 0.63	Product Weight 0.28 lbs

Product Questions & Answers 3

Product Questions & Answers

Will this elbow fitting work with standard JIC connections?

Question by: Neal B on May 14, 2025, 10:05 AM

this adapter is designed to connect two 7/8-14 Male JIC 37 degree flare fittings at a 90-degree angle.

Answer by: Customer Support on May 16, 2025, 7:48 AM

Running a 90-degree elbow in a tight marine compartment and need to know if both ends are the same thread size before I go pulling things apart. These JIC fittings both 7/8-14?

Question by: Merle A on Nov 21, 2025, 8:59 AM

Both ends are 7/8-14 JIC 37-degree flare, so you're working with a same-size configuration on each side. No reducers or adapters needed to match up. The 90-degree angle is built into the body itself, which makes it a solid choice when you're working around tight bends or routing hose lines through confined spaces on a vessel.

Answer by: Customer Support on Nov 23, 2025, 8:11 AM

trying to keep my hose from kinking up, is this the elbow that turns the line 90 degrees and still stays JIC on both ends?

Question by: Howard W on Jan 18, 2026, 7:08 AM

Built as a 90 degree elbow adapter, it lets you change direction while keeping a JIC 37 degree flare connection on both sides. Both ends are 7/8-14 male JIC 37 degree flare, so it is meant for a same-size JIC-to-JIC turn.

Answer by: Customer Support on Jan 19, 2026, 11:28 AM

Similar Products

Model Number	Tube O.D.	Thread 1	Thread 2	A	B
2039-12-12S	0.75	1-1/16-12	1-1/16-12	1.66	1.66
2039-10-10S	0.63	7/8-14	7/8-14	1.45	1.45
2039-16-16S	1	1-5/16-12	1-5/16-12	1.81	1.81
2039-20-20S	1.25	1-5/8-12	1-5/8-12	2.06	2.06
2039-4-4S	0.25	7/16-20	7/16-20	0.89	0.89
2039-6-6S	0.38	9/16-18	9/16-18	1.06	1.06
2039-8-8S	0.5	3/4-16	3/4-16	1.25	1.25
2500-03-03	0.19	3/8-24	3/8-24	0.83	0.83