Steel Crimp 1 Wire Braid Reduced Bore Fitting, 1-7/8 - 12 Female JIC 37 deg Flare Swivel, -24 Hose, Straight

That range is your target assembly torque, not a structural load limit. For the 1-7/8-12 JIC thread on this fitting, you want to land somewhere between 188 and 213 lb/ft during installation. Staying within that window gives you a proper metal-to-metal seat at the 37-degree flare without over-stressing the swivel or distorting the sealing surface.

This steel crimp fitting is designed specifically for one-wire braid hoses.

For a -24 hose end with a female JIC 37 degree flare swivel, this part matches that setup. It’s a straight steel crimp fitting with a 1-7/8 - 12 female JIC (SAE 37) thread on the swivel end.

For a straight female JIC 37 degree flare swivel on a -24 hose, this one matches that setup. It’s a reduced bore steel crimp fitting with a 1-7/8 - 12 female JIC swivel end and it’s made to crimp onto -24 hose.

The torque spec stays at 188-213 lb/ft regardless of the reduced bore designation. The bore size affects flow, not the mechanical connection requirement. That range applies to this fitting as listed, so you can torque it the same way you would any other JIC swivel in this class without adjusting your procedure.