Steel Crimp 1 Wire Braid Reduced Bore Fitting, 1-5/16 - 12 Female JIC 37 deg Flare Swivel, -16 Hose, Straight

It’s a straight steel crimp fitting made for a -16 hose, with a female JIC 37 degree flare swivel on the threaded end. The thread is 1-5/16 - 12, so you would be pairing it with a matching 37 degree flare male JIC connection in that same thread size.

That range is your target, not a ceiling. The 117 to 125 lb/ft spec covers the full acceptable torque window for this fitting, so you want to land somewhere inside it rather than treating the high end as a hard stop. Staying within that window helps ensure a proper seal on the 37-degree flare face without overloading the swivel.

This fitting is designed for use with -16 hoses, making it suitable for a variety of industrial fluid connection needs.

For a -16 hose, this fitting matches that size and it is a straight 1-5/16 - 12 Female JIC 37 degree flare swivel end. It is a steel crimp fitting for 1 wire braid hose with a reduced bore.

Correct. JIC 37 degree flare connections seal on the metal-to-metal contact between the flare surfaces, so thread sealant like tape or pipe dope would actually interfere with that seal rather than help it. Just make sure the mating flare surface is clean and undamaged before assembly, and torque it to the specified 117 to 125 lb/ft range on the second end hex.