Steel Adapter, 1-1/16-12 Female JIC 37 deg Flare Swivel To 1-1/16-12 Male JIC 37 deg Flare, 90 deg Bent Tube (For pressures thru 4 Heavy Spiral Hose)

For a same-size JIC to JIC swap on heavy spiral hose, the FF5163-1212S covers you. Both ends are 1-1/16-12 thread with 37 degree flare seats, and the fitting is rated for pressures through 4-wire heavy spiral hose. The 90 degree bent tube geometry gives you that direction change without needing a separate elbow, so if your existing fitting matches those thread specs, this is a straight replacement.

This steel adapter is rated to handle pressures generated by up to four heavy spiral hoses.

For a 90 degree change in direction, this adapter is a 1-1/16-12 female JIC 37 degree flare swivel on one end and a 1-1/16-12 male JIC 37 degree flare on the other, so it matches those thread sizes and flare types.

It's built to handle pressures associated with up to 4 heavy spiral hoses, so it should be suitable for your application.

Tight quarters like that are exactly where a sweep 90 configuration earns its keep. The 90-degree bent tube on this adapter lets you redirect the hose path without forcing the hose itself to make that turn, which takes the stress off the hose end and keeps things from kinking up near the connection point. The female JIC swivel end also gives you a little rotational freedom during installation so you can clock the angle where you need it without fighting the fitting.