Steel Crimp 1 Wire Braid Reduced Bore Fitting, 1-5/8 - 12 Female JIC 37 deg Flare Swivel, -20 Hose, 90 deg Elbow

For a -20 hose, this part is a 90 degree elbow steel crimp fitting in the Aeroquip reduced bore series, and it uses a 1-5/8 - 12 female JIC 37 degree flare swivel on the threaded end.

For a -20 hose needing a 1-5/8-12 female JIC 37 degree flare swivel at a 90 degree angle, yes, that's exactly what this fitting is built for. It's a steel crimp design rated for 1 wire braid hose, so as long as your hose matches the -20 sizing and your crimper is set up for this style, you're in good shape. The reduced bore designation is worth noting since the internal flow passage is smaller than a full bore fitting of the same hose size, so factor that in if flow volume is tight in your system.

No mandrel is required for this fitting. That's one of the practical advantages here. You can crimp it directly onto -20 hose without the extra tooling step, which cuts down on setup time considerably. The 1-wire braid construction is built to handle the crimp process cleanly without it.

Engineered for durability, this steel crimp fitting is designed to withstand demanding industrial environments and frequent use, thanks to its robust construction and one-wire braid reinforcement.