Skip to the beginning of the images gallery

EN857 1SC Single Wire Braid Hose, 0.25 Inch ID, Up To 3250.00 PSI

Burst Pressure 13000	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose I.D. 0.25	Hose O.D. 0.48	Maximum Operating Pressure 3250	Minimum Bend Radius 2.95	Minimum Bend Radius 2.95	Reel Qty (ft) 500	Supplier Part Number EC115-04LRL	Alternate Part Numbers Alternate Part Number C1MP66, Alternate Part Number EC115-04, Alternate Part Number EC115-04RL, Alternate Part Number MI-08753161, Alternate Part Number MINO-00015X93333, Alternate Part Number TK-EC115-04RL	Product Weight 0.01 lbs

Product Questions & Answers 3

Product Questions & Answers

got a 1/4 inch ID hydraulic line that needs replacing on a skid steer, this hose rated for that kind of pressure?

Question by: Judy E on Nov 24, 2025, 10:01 AM

At 3250 PSI working pressure, it'll hold up fine for typical skid steer hydraulic circuits. The 0.25 inch ID matches what you're looking for, and the single wire braid construction handles petroleum-based fluid just like what most skid steers run. Burst pressure is rated at 13,000 PSI, so there's a solid safety margin built in. Just make sure you're using the correct 2-piece crimp fittings when you put the assembly together.

Answer by: Customer Support on Nov 26, 2025, 7:39 AM

hose is rated for 3250 PSI right? got a system running petroleum-based fluid and want to make sure this'll hold up before i order a whole reel

Question by: Randy F on Jun 27, 2025, 3:00 PM

For petroleum-based hydraulic systems at that pressure, this hose fits the bill. The maximum operating pressure is 3250 PSI, and it's built with a synthetic rubber tube and single wire braid reinforcement specifically for hydraulic service with petroleum-based fluids. The burst pressure is rated at 13000 PSI, so there's a solid safety margin above that working pressure. You're getting 500 feet per reel, so make sure your project justifies the quantity before ordering.

Answer by: Customer Support on Jun 29, 2025, 6:55 AM

got a tight spot to route a 1/4 inch hose. how sharp can i bend this one without kinkin it?

Question by: Danny M on Sep 4, 2025, 4:15 PM

Minimum bend radius on this hose is 2.95 inches. Keeping your routing at or above that radius helps it flex without stressing the single wire braid.

Answer by: Customer Support on Sep 6, 2025, 7:50 AM

Similar Products

Model Number	Hose I.D.	Hose O.D.	Maximum Operating Pressure	Burst Pressure	Minimum Bend Radius	Reel Qty (ft)
EC115-04RL	0.25	0.48	3250	13000	2.95	500
EC115-06RL	0.38	0.61	2600		2.48	500
EC115-08LRL	0.5	0.75	2300		3.54	500
EC115-10RL	0.62	0.88	1900		3.94	500
EC115-12RL	0.75	1.02	1525		4.72	250
EC115-16RL	1	1.31	1275		6.3	250
EC115-20	1.25	1.63	925		8.27