Skip to the beginning of the images gallery

SD11 Series Walvoil 5V11110000 SD11 SD16 DETENT KI

Brand Walvoil Fluid Power Corp.	Brand Walvoil Fluid Power	Pack Size 1.00	UOM EA	Key (4)	Supplier Part Number 5V11110000	Product Weight 0.56 lbs	Alternate Part Numbers Alternate Part Number 027671-013, Alternate Part Number 5V11110000, Alternate Part Number C1HV52

Product Questions & Answers 5

Product Questions & Answers

what's the temperature range on this detent kit? got equipment sittin outside through some pretty rough winters and hot summers both

Question by: Neal B on Nov 26, 2025, 8:33 AM

Running conditions for this kit go from -4°F up to 176°F with the standard Buna-N seals included. Cold storage or non-operating conditions stretch further, down to -40°F on the low end and up to 140°F ambient. So winter cold snaps and summer heat should both fall well within range for most field environments.

Answer by: Customer Support on Nov 27, 2025, 7:26 PM

What kinda fluid should I be running in this valve?

Question by: Duane P on Apr 16, 2025, 9:17 AM

This SD11 series valve needs a fluid viscosity between 80 and 400 SSU for operating, 70 SSU minimum, and 1950 SSU maximum.

Answer by: Customer Support on Apr 17, 2025, 8:13 PM

got a system that runs about 18 gpm. is that too much for this walvoil SD11/SD16 detent kit?

Question by: Frank R on Mar 23, 2026, 8:42 PM

For flow, it lines up. The SD11 series flow rating is 18 GPM, so an 18 GPM system is within the stated rating.

Answer by: Customer Support on Mar 25, 2026, 6:48 PM

what's the max pressure this valve can handle runnin a parallel circuit setup?

Question by: Shawn P on Jun 8, 2025, 3:03 PM

For parallel circuits, the SD11 Series monoblock valve is rated up to 4600 PSI. If you're running a series circuit instead, that ceiling drops to 3600 PSI. Worth knowing upfront so you're sizing your system around the right number.

Answer by: Customer Support on Jun 10, 2025, 6:42 AM

got an SD11 or SD16 valve body, is this detent kit the right one for it?

Question by: Debbie G on Feb 20, 2026, 3:24 PM

For SD11 and SD16 monoblock valves, this part is the detent kit tied to Walvoil part number 5V11110000, so it matches those SD11 or SD16 applications by model.

Answer by: Customer Support on Feb 22, 2026, 9:16 AM

Similar Products

Model Number	Key	Product Description
FVL5V11110000	(4)	WALVOIL 5V11110000 SD11 SD16 DETENT KI
3CU1425130	(3)	WALVOIL SPOOL (TYPE 2). STEEL. MOTOR SPO
FVL3XGIU532660	(6)	WALVOIL 3XGIU532660 SD11 POWER BEYOND PL
FVL3XTAP532450	(6)	WALVOIL 3XTAP532450 SD11 CLOSED CENTER P