Wire Inserted Suction SAE 100R4 Black Hose, 2.00 Inch ID, Up to 100.00 PSI

For suction and transfer work, it’s meant for petroleum hydraulic fluids, fuel, gasoline, and lubricating oils, along with air and water. It’s an SAE 100R4 wire inserted suction hose with a synthetic rubber tube and cover, so it’s built around those kinds of fluids.

That range fits well within what this hose is rated for. The temperature limits run from -40°F on the cold end up to 275°F on the high end, so your operating conditions fall inside those boundaries on both sides. It's built with a synthetic rubber inner tube and a synthetic rubber cover, which hold up across that kind of spread without getting brittle in the cold or breaking down in the heat near pump equipment.

This hose is designed for suction and transfer of petroleum-based hydraulic fluids, fuel, lubricating oils, gasoline, water, and various other industrial fluids. Just be sure to follow the general guidelines for selection, installation, and maintenance to keep everything running smoothly.

For petroleum-based hydraulic fluid in a suction setup, this hose is built exactly for that kind of work. The inner tube is synthetic rubber and handles petroleum hydraulic fluids, lubricating oils, and fuel without issue. Pressure-wise, you're capped at 100 PSI, so as long as your system stays within that, you're in good shape. The helical wire reinforcement between the two textile braids keeps the hose from collapsing under suction, which is the real concern in these applications.

This hose works with gasoline, hydraulic fluids, lubricating oils, fuel, water, and other industrial fluids.