RT Series In-Tank Return Filter, SAE-20 Ports, 9.0 Inch 10.0 Micron Synthetic Element

At 25 psi cracking and 48 psi full flow, the bypass is calibrated for low-pressure return line duty, not high-pressure supply lines. As long as your return flow stays within the 100 gpm rating and your system isn't pushing excessive backpressure, the bypass won't open under normal conditions. It's a tank-mounted filter, so return line pressures are typically well below that 25 psi threshold during regular operation.

This return filter uses SAE-20 ports for easy connection into your existing hydraulic system.

The porting on this RT Series in-tank return filter is SAE-20, and this specific configuration lists the other ports as none. It is a low-pressure, tank-mounted return filter setup with a die-cast aluminum head and cap.