Brass Push>Connect Metric Tube Fitting, 8.00 mm Tube OD To 3/8-19 Male Universal BSPP/BSPT, 90 deg Elbow

Push the tubing straight into the fitting to connect, and it seals with a Buna-N O-ring. When you need to pull it back off, you just press the collet ring to release the tube, so no tools are needed for normal assembly or disassembly.

This fitting is designed for compressed pneumatic instrumentation, circuit lubricant, and cooling lines. It can handle pressures up to 250 psi, so it should work in some lower-pressure hydraulic applications, but confirm your system's pressure requirements.

BSPP and BSPT share the same thread pitch and tooth profile, so the physical thread form is close enough that a single male fitting can engage with either port type. The difference between the two is that BSPT threads taper slightly for a mechanical seal, while BSPP threads are parallel and rely on a face seal or O-ring. On this fitting, the Buna-N O-ring handles the sealing duty, which is what makes it functional across both thread standards without needing separate versions for each.