PS Series Pressure Switch, Single Switch, 300-2600 PSI Adjustment Range, Apprx. 300 PSI @ 1125 Setting Reset Pressure Differential

Adjustment range runs from 300 to 2600 PSI, so there's a solid spread to work with across a wide variety of hydraulic systems. Repeatability is rated at 2% of set pressure, which is tight enough for most industrial applications where you need the switch to trip consistently at the same point. The reset pressure differential is fixed at approximately 300 PSI when set around the 1125 mark, so factor that deadband into your setup if you're working near that range.

For adjustment, the setpoint range is 300 to 2600 PSI, so 2000 PSI is within the adjustable window. On the pressure side, it is rated for 4000 PSI working pressure with a 12,000 PSI burst rating.