The source for all your fluid power needs. Solutions. Period.

Toggle Nav
Cart
Search
main product photo

KDG4V-3(S) Series Subplate/Manifold Mount NFPA Size D03 Proportional Valve, 4-Way, 3-Position, Spring Centered, Closed Center, Meter In & Meter Out, 24VDC Current Controlled DIN 43650 Coil. STD Performance, 1450 PSI Port T, Waterproof Manual Override

Ask A Question
Application
Die casting & foundry, Machine tool, Marine/Offshore, Press, Primary metal, paper, Test equipment & simulation, Turbine control (wind, steam, water)
Body Material
Cast Iron
Check Valve
No
Coil Rating
24VDC Current Controlled
Coil Type
DIN 43650
Communication Bus
None
Customer Programmable
No
Design Code
60
Diode
No
Brand
Danfoss (Power Solutions II LLC)
Brand
Danfoss Power Solutions
Pack Size
1.00
UOM
EA
Features
Available in three performance levels - ultra, high and standard - to suit a wide range of application requirements|Direct-acting|Reduce commissioning time through plug-and-play funcitonality
Feedback Sensor
No
Fluid Cleanliness
17/15/12 micron
Function
Meter In & Meter Out
Interface
ISO4401-03/NFPA D03/CETOP 3/NG06
Leakage
Standard
Manual Override
Water-resistant
Minimum Working Temperature
-20 Celsius
On Board Electronics
None
P Current
1.6 A
Performance
Standard
Rated Flow
2
Rated Flow
2
Seal Material
Fluorocarbon
Spool Center Condition
Closed Center
Spring Arrangement
C
Supplier Part Number
02-154277
Tank Port Rating
100
Valve Mount Type
Subplate
Alternate Part Numbers
Alternate Part Number C1AD14, Alternate Part Number KDG4V3S2C08NHMUH560
Product Weight
5.00 lbs
Product Questions & Answers 2

Product Questions & Answers

got an NFPA D03 manifold already. is this one gonna bolt right up, and what’s the interface called?
Question by: Diane R on Oct 26, 2025, 7:11 PM
It uses the ISO4401-03 interface, which is also the NFPA D03, CETOP 3, NG06 mounting pattern. It is a subplate or manifold mount valve, so it is meant to bolt to that standard D03 pad.
Answer by: Customer Support on Oct 28, 2025, 6:24 AM
Will this work on my die casting machine?
Question by: Hubert B on Mar 29, 2025, 8:04 AM
This valve is used in die casting applications, so it should work for your machine. Just make sure it meets the pressure and flow requirements.
Answer by: Customer Support on Mar 30, 2025, 7:20 PM

Similar Products

Part Number Model Number Rated Flow Function Coil Rating Coil Type Features Price Buy Now
02-154277 KDG4V-3S-2C08N-H-M-U-H5-60 2 Meter In & Meter Out 24VDC Current Controlled DIN 43650 Available in three performance levels - ultra, high and standard - to suit a wide range of application requirements|Direct-acting|Reduce commissioning time through plug-and-play funcitonality
02-317856 KDG4V-3S-2C19N-H-M-U-H5-60 5 Meter In & Meter Out 24VDC Current Controlled DIN 43650 Available in three performance levels - ultra, high and standard - to suit a wide range of application requirements|Direct-acting|Reduce commissioning time through plug-and-play funcitonality
02-358824 KDG4V3-2C28S-M-U-G7-60 7.4 Meter Out 12VDC DIN 43650 Available in three performance levels - ultra, high and standard - to suit a wide range of application requirements|Direct-acting|Reduce commissioning time through plug-and-play funcitonality