Skip to the beginning of the images gallery

Hydraulic Spreader, 1 Ton, 0.56 Inch Collapsed Tip Clearance, 4.00 Inch Spread

Capacity (tons) 1	Collapsed Tip Clearance 0.56	Brand HYDRAULIC TECH USA LLC(SPX)	Brand Hydraulic Tech USA	Pack Size 1.00	UOM EA	Maximum Spread 4	Alternate Part Numbers Alternate Part Number C1KM23, Alternate Part Number MI-00838073, Alternate Part Number MINO-00630X05330	Supplier Part Number HS2000	Product Weight 4.80 lbs

Product Questions & Answers 3

Product Questions & Answers

What kinda clearance do I need to get this thing in place?

Question by: Dean H on Nov 26, 2025, 9:22 PM

You're gonna need just a hair over a half inch, about 0.56 inches to be exact, to get the jaws where they need to be.

Answer by: Customer Support on Nov 28, 2025, 12:15 PM

got a tight spot, how much gap do i need to get the jaws in there?

Question by: Lance H on Feb 18, 2026, 8:33 AM

With the jaws collapsed, it only needs about 0.56 inch of tip clearance to engage, which is roughly 9/16 inch.

Answer by: Customer Support on Feb 20, 2026, 6:02 AM

only got about half an inch of gap to work with on this press frame, will that be enough to get the jaws in there?

Question by: Ross W on Jun 8, 2025, 3:53 PM

Half an inch is right on the edge, but you should be fine. The HS2000 needs just 9/16 of an inch of clearance to engage the jaws, which works out to about 0.563 inches. If your gap is at least that wide, the tool will seat properly and you can get to work.

Answer by: Customer Support on Jun 10, 2025, 7:23 AM

Similar Products

Model Number	Capacity (tons)	Collapsed Tip Clearance	Maximum Spread	Oil Capacity	Price	Buy Now
HS2000	1	0.563	4
HS3000	1-1/2	1.25	11.5