Skip to the beginning of the images gallery

HSS Series Stainless Steel Worm Gear Clamp, 0.50 Inch Width, 0.81 To 1.75 Inch Diameter

Brand Ideal Clamp Products	Brand Ideal Clamp Products	Pack Size 1.00	UOM EA	Maximum Diameter 1.75	Minimum Diameter 0.81	Supplier Part Number 670040020051	Product Weight 0.05 lbs	Alternate Part Numbers Alternate Part Number 67004-0020, Alternate Part Number 67004-0020-051, Alternate Part Number C1CY73, Alternate Part Number MI-00340269, Alternate Part Number MINO-00240F79078

Product Questions & Answers 5

Product Questions & Answers

what's the clamping range on this one? got a hose that's sitting right around an inch diameter and need to make sure it'll cinch down proper

Question by: Norm M on Aug 9, 2025, 10:55 AM

Fits anywhere from 13/16 of an inch up to 1-3/4 inches, so a one-inch hose lands right in the middle of that range. Plenty of room to get a solid bite on it.

Answer by: Customer Support on Aug 11, 2025, 9:33 AM

What size range does this clamp fit? I'm clamping some hoses with an outside diameter of about 1.25 inches.

Question by: Steve R on May 14, 2025, 7:32 PM

This clamp is designed to accommodate diameters from 0.8125 inches up to 1.75 inches, so it should work well for your 1.25-inch hoses.

Answer by: Customer Support on May 16, 2025, 5:02 PM

got a hose that measures right around 1 inch OD, is this clamp gonna cover that?

Question by: Connie P on Oct 21, 2025, 1:12 PM

Fit-wise you are in the sweet spot. This HSS20 clamp adjusts from 0.8125 inch up to 1.75 inch diameter, so a 1 inch outside diameter hose sits comfortably inside that range.

Answer by: Customer Support on Oct 22, 2025, 5:43 PM

What size range will this clamp fit?

Question by: Harold S on Aug 5, 2025, 12:40 PM

This clamp fits diameters from 0.81 inches up to 1.75 inches.

Answer by: Customer Support on Aug 6, 2025, 9:58 PM

screw on this thing, is it stainless too or just the band?

Question by: Ray A on Jan 19, 2026, 6:11 AM

Both the band and housing are SAE 300 series stainless steel, and the screw is SAE 410 series stainless steel, so the whole clamp is stainless throughout. No mixing in a zinc or carbon steel screw like some cheaper clamps do.

Answer by: Customer Support on Jan 20, 2026, 8:27 AM

Similar Products

Model Number	Width (in)	Minimum Diameter	Maximum Diameter
HSS12	0.50	0.6875	1.25
HSS16	0.50	0.8125	1.5
HSS20	0.50	0.8125	1.75
HSS32	0.50	1.5625	2.5
HSS10	0.50	0.5625	1.0625
HSS24	0.50	1.0625	2
HSS28	0.50	1.3125	2.25
HSS36	0.50	1.8125	2.75
HSS40	0.50	2.0625	3
HSS44	0.50	2.3125	3.25
HSS56	0.50	3.0625	4
HSS6	0.50	0.4375	0.7813
HSS72	0.50	1.875	5
HSS8	0.50	0.5	0.9063