Skip to the beginning of the images gallery

Hose Protective Fire Sleeve, 1.50 Inch ID

Accessories Clamp (2 Required Per Hose Assembly): FF9217-0648S	Battery Included No	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	I.D. 1.5 in	Machine Mountable No	Minimum Working Temperature -65	Supplier Part Number 624-24	Product Weight 2.06 lbs	Alternate Part Numbers Alternate Part Number C1HJ65

Product Questions & Answers 2

Product Questions & Answers

firesleeve says 1.50 ID -- does that mean it'll fit snug over a standard 1.5 inch hose or do i need to go up a size?

Question by: Tony S on Apr 28, 2025, 10:46 AM

For a hose with a 1.5 inch outer diameter, you'd generally want to size up. The 1.50 inch ID on this sleeve refers to its inner diameter, so it's built to fit around hoses whose outside measurement is at or close to that figure. If your hose OD runs right at 1.5 inches, the fit should work, but a hose that's noticeably larger on the outside won't slide in cleanly. Worth measuring your hose OD before ordering to make sure you're in the right range.

Answer by: Customer Support on Apr 30, 2025, 6:26 AM

got a 1.50 inch hose, is this sleeve the right size or is that 1.50 measured different

Question by: Neal W on Aug 25, 2025, 3:01 PM

The 1.50 inch dimension on this part is the sleeve ID, so it is sized as a 1.50 inch inside diameter fire sleeve.

Answer by: Customer Support on Aug 27, 2025, 10:03 AM

Similar Products

Model Number	Accessories	I.D.
624-24	Clamp (2 Required Per Hose Assembly): FF9217-0648S	1.5 in
624-38	Clamp (2 Required Per Hose Assembly): FF9217-0648S	2.38 in
624-46	Clamp (2 Required Per Hose Assembly): FF9217-0664S	2.88 in
624-13	Clamp (2 Required Per Hose Assembly): FF9217-0622S	0.81 in
624-14	Clamp (2 Required Per Hose Assembly): FF9217-0622S	0.88 in