Skip to the beginning of the images gallery

H Series Geroter Motor, 22.60 cu in/rev, 4 Bolt Mounting Flange, 1 in. Straight Keyed Shaft, 1/2 NPT Ports, Compact yet powerful|Extended bearing life|Increased shaft seal

Application Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers	Design Code 9	Displacement 22.60	Displacement 22.6	Brand Danfoss Power Solutions II (Char-Lynn)	Brand Char-Lynn	Pack Size 1.00	UOM EA	Features Compact yet powerful\|Extended bearing life\|Increased shaft seal	Identification None	Mount 4 Bolt	Mount 4 Bolt	Port Type .500-14 NPTF Dryseal Pipe Thread Ports	Ports 1/2 NPT	Ports 1/2 NPT	Shaft 1 in. Straight Keyed	Shaft 1 in. Straight Keyed	Supplier Part Number 101-1008-009	Torque Rating 407 newton metre	Torque Rating 407 newton metre	Valve Options None	Alternate Part Numbers Alternate Part Number 101-1008-009, Alternate Part Number C1AG28	Product Weight 14.50 lbs

Product Questions & Answers 3

Product Questions & Answers

what's the break-in procedure for this motor before putting it under full load?

Question by: Lynn H on Apr 24, 2025, 9:47 AM

Run it for about an hour at roughly 30% of rated pressure before you throw a full load on it. Make sure the motor is filled with fluid before any load gets applied. Skipping that step or rushing through it can shorten the motor's life considerably, so it's worth taking the time upfront.

Answer by: Customer Support on Apr 26, 2025, 6:53 AM

What kind of machines does this motor typically run?

Question by: Roy S on Dec 18, 2025, 8:46 AM

This H Series motor works well in agricultural equipment like augers, harvesters, and seeders. It's also used in industrial sweepers and floor polishers.

Answer by: Customer Support on Dec 20, 2025, 6:49 AM

trying to swap out an old char-lynn motor on an auger. is this one the 4-bolt mount with a 1 inch straight keyed shaft?

Question by: Howard C on Nov 1, 2025, 11:00 AM

This motor is set up with a 4 bolt mounting flange and a 1 in straight keyed shaft. It also uses 1/2 NPTF dryseal pipe thread ports, so those are the key connection points to match up.

Answer by: Customer Support on Nov 2, 2025, 1:14 PM