Skip to the beginning of the images gallery

Four Heavy Spiral Wire SAE 100R12 Hose, 0.50 Inch ID, Up to 6000.00 PSI

Abrasion Resistance 28	Application Hydraulic system service with petroleum and water based fluids, for general use	Color Black	Conductivity 30	Construction 4 Spiral	Cover Material Synthetic Rubber	Dash Size -8	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose I.D. 0.50	Hose O.D. 0.92	Impulse Cycle Life 1000000 cycle	Lay Line Style Embossed	Maximum Operating Pressure 6000	Minimum Bend Radius 7.09	Minimum Bend Radius 7.09	Minimum Working Temperature -40	Reel Qty (ft) Rolls Only	Reinforcement Material Wire	Supplier Part Number GH493-8RL	Tube Material Synthetic Rubber	Alternate Part Numbers Alternate Part Number C1CX48, Alternate Part Number GH493-08, Alternate Part Number GH493-08-100, Alternate Part Number GH493-08-50, Alternate Part Number GH493-8RL, Alternate Part Number MI-00290512, Alternate Part Number MINO-00015F38140	Product Weight 0.93 lbs

Product Questions & Answers 3

Product Questions & Answers

hose is rated for 6000 psi, but what kind of temps can it actually handle before it starts breaking down?

Question by: Cody Y on Jul 2, 2025, 7:38 AM

Rated for continuous use from -40°F up to 260°F, so it covers a pretty wide range of operating conditions. Cold starts in freezing weather won't cause the hose to stiffen and crack prematurely, and on the high end it holds up through heat that would degrade lesser hose constructions. The synthetic rubber tube and cover both contribute to that range, and the four-spiral wire reinforcement keeps it from swelling or deforming under pressure even as temps climb.

Answer by: Customer Support on Jul 3, 2025, 1:08 PM

What kinda fluids can this hose handle without breaking down?

Question by: Clint E on Oct 5, 2025, 10:21 AM

This hose is made for hydraulic systems running on petroleum and water-based fluids, so it should hold up just fine with those.

Answer by: Customer Support on Oct 7, 2025, 9:14 AM

got a tight spot to route this line, how sharp can i bend that GH493-8 hose without kinking it

Question by: Vince R on Apr 14, 2025, 5:28 PM

For routing, the minimum bend radius on the GH493-8 is 7.09 inches. Keeping your bend at or above that radius is the spec-backed way to avoid over-stressing the four-spiral wire reinforcement.

Answer by: Customer Support on Apr 15, 2025, 7:26 PM

Similar Products

Model Number	Hose I.D.	Hose O.D.	Maximum Operating Pressure	Minimum Bend Radius	Reel Qty (ft)
GH493-20	1.25	1.83	4500	16.54	Rolls Only
GH493-12	0.75	1.2	5500	9.45	Rolls Only
GH493-16	1	1.48	5100	11.81	Rolls Only
GH493-6	0.38	0.79	6500	4.92	Rolls Only
GH493-10	0.63	1.11	6000	7.87	Rolls Only
GH493-24	1.5	2.12	4000	19.68	Rolls Only
GH493-32	2	2.64	4000	25.2	Rolls Only
GH493-8	0.5	0.92	6000	7.09	Rolls Only