Flexmaster Series Danfoss / Eaton Flexmaster Tube and Pipe Joints Gasket

Up to 4 degrees of angular misalignment per end is within what the straight-through Flexmaster configuration handles. So some offset during operation is not going to break the seal as long as you stay within that tolerance. If your connection involves a tee, elbow, or cross fitting, the limit drops to 2 degrees per end, so keep that in mind depending on your setup.

The Flexmaster joints can handle up to 4 degrees of angular misalignment on each end for straight runs. For tees, elbows, and crosses, it's up to 2 degrees per end.