Flexmaster Series Danfoss / Eaton Flexmaster Tube and Pipe Joints Retainer

Sealing is the job here, not restraining the hydraulic lines system. The Flexmaster joint keeps the connection tight, but axial movement, thrust loads, and system stability all need to be managed with your normal hangers, guides, and anchors. Don't rely on the joint itself to hold everything in place structurally.

For a straight-through joint, it will accommodate up to 4 degrees of angular misalignment per end. If you are using tees, elbows, or crosses, the limit is up to 2 degrees per end.

These Flexmaster joints are rated to 300 psi, but keeping your system secure is still on you. You'll need to use hangars, guides, and anchors to keep everything in place.