Flexmaster Pipe & Tube Joint, Plated Steel, 2.00 Inch Pipe Size, 90 deg Long Elbow

For angular misalignment, this joint handles up to 2 degrees per end on elbows, which gives you some wiggle room if your pipe run isn't perfectly aligned coming into the bend. Both ends use compression fittings and are sized for a 2.375-inch pipe O.D. The Buna-N seals hold up from -25 degrees on the low end, and the joint is rated for up to 300 psi service. One thing worth knowing upfront: the Flexmaster is built to seal the connection, not to hold the hydraulic lines system together. You'll still need your standard hangers, anchors, and guides to keep the pipe from moving around.

This Flexmaster joint can handle angular misalignment up to 4 degrees per end; that drops to 2 degrees for elbows.