E-Z Clip Series Danfoss / Eaton E-Z Clip System A/C Refrigeration Products Cages

Use the FT1357 Clip Closing Pliers to secure the connections instead of a traditional press. You will not need a power supply or a standard crimper since the system is built to be as simple as using a regular pair of pliers in tight areas.

Start by cutting the hose square, then slip two correct-size clips onto the hose end. Lube the nipple with a generous amount of the system’s compressor oil so it goes in without tearing things up, then push the nipple in until the hose is tight against the nipple shoulder with no gap. Snap the cage into the nipple groove and make sure it can rotate in that groove, slide the clips over the cage arms into the channels, and close the clips using FT1357 clip closing pliers while keeping the pliers square on the connection points.

You'll need to match the clip size to the GH134 Multi-Refrigerant hose you're using. The product description mentions needing "sized clips," so ensuring you have the right match is key for a leak-free crimp.