Skip to the beginning of the images gallery

Double Wire Braid SAE 100R16 Type S Hose, 1.50 Inch ID, Up to 2000.00 PSI

Abrasion Resistance 28	Burst Pressure 8000	Conductivity 30	Cover Material Synthetic Rubber	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose I.D. 1.50	Hose O.D. 2.03	Impulse Cycle Life 600000 B7	Lay Line Style Ink Transfer	Maximum Operating Pressure 2000	Minimum Bend Radius 10	Minimum Bend Radius 10	Minimum Working Temperature -50	Reel Qty (ft) Rolls Only	Reinforcement Material Wire	Supplier Part Number GH781-24	Tube Material Synthetic Rubber	Alternate Part Numbers Alternate Part Number C1FH59, Alternate Part Number MI-02059252, Alternate Part Number MINO-00015F39072	Product Weight 2.03 lbs

Product Questions & Answers 4

Product Questions & Answers

been running hydraulic lines on some pretty heavy equipment and need something that'll hold up at 2000 psi steady, this hose rated for that or is 2000 the burst number?

Question by: Warren G on Feb 28, 2026, 7:04 AM

2000 PSI is the maximum operating pressure, not the burst number. Burst pressure on this hose is rated at 8000 PSI, which gives you a 4:1 safety margin over working pressure. So running it at a steady 2000 PSI falls right at the top of its rated operating range. Worth keeping that in mind when sizing for your application.

Answer by: Customer Support on Mar 2, 2026, 6:50 AM

got a 1-1/2 inch hydraulic line on a machine, is this the right size hose or am i missing something

Question by: Patty J on Mar 13, 2026, 2:04 PM

For size, this hose has a 1.50 inch inside diameter and about a 2.03 inch outside diameter. If your old hose is a true 1-1/2 inch ID, that matches the ID on this one.

Answer by: Customer Support on Mar 14, 2026, 6:43 PM

What kinda fluids can I run through this hose? Just regular hydraulic oil, or...?

Question by: Curt C on Mar 6, 2026, 8:16 AM

This hose is designed for hydraulic systems using either petroleum-based or water-based fluids, so yeah, regular hydraulic oil is fine. It's also good for general industrial use.

Answer by: Customer Support on Mar 7, 2026, 2:13 PM

got a tight spot on a loader, how sharp can i bend this 1.5 inch hose without kinking it

Question by: Clint R on Feb 19, 2026, 9:27 AM

For bend limits, the minimum bend radius on this hose is 10 inches. Staying at or above that radius helps keep it from kinking and also lines up with the hose’s stated bend capability.

Answer by: Customer Support on Feb 21, 2026, 6:26 AM

Similar Products

Model Number	Hose I.D.	Hose O.D.	Maximum Operating Pressure	Burst Pressure	Minimum Bend Radius	Reel Qty (ft)
GH781-10R250	0.63	0.93	4000	16000	4	225-300
GH781-4R500	0.25	0.53	6500	26000	2	450-550
GH781-6R500	0.38	0.69	5300	21200	2.5	450-550
GH781-8R500	0.5	0.81	4500	18000	3.5	450-550
GH781-16R150	1	1.42	3000	12000	6	125-200
GH781-12R250	0.75	1.1	3500	14000	4.75	225-300
GH781-20	1.25	1.65	2500	10000	8.25	Rolls Only
GH781-24	1.5	2.03	2000	8000	10	Rolls Only
GH781-32	2	2.53	1600	6400	12.5	Rolls Only