Skip to the beginning of the images gallery

Double Wire Braid SAE 100R16 Type S Hose, 0.75 Inch ID, Up to 3500.00 PSI

Abrasion Resistance 28	Burst Pressure 14000	Conductivity 30	Cover Material Synthetic Rubber	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose I.D. 0.75	Hose O.D. 1.10	Impulse Cycle Life 600000 B7	Lay Line Style Ink Transfer	Maximum Operating Pressure 3500	Minimum Bend Radius 4.75	Minimum Bend Radius 4.75	Minimum Working Temperature -50	Reel Qty (ft) 225-300	Reinforcement Material Wire	Supplier Part Number GH781-12R250	Tube Material Synthetic Rubber	Alternate Part Numbers Alternate Part Number C1CX59, Alternate Part Number GH781-12, Alternate Part Number GH781-12-100, Alternate Part Number GH781-12-50, Alternate Part Number MI-03010695, Alternate Part Number MINO-00015F55977	Product Weight 0.65 lbs

Product Questions & Answers 5

Product Questions & Answers

Got a line that needs 3/4 inch ID hose, is this one rated for 3500 psi working pressure or is that the burst number

Question by: Janet B on Feb 23, 2026, 9:20 PM

Working pressure is 3500 PSI on this hose. The burst pressure is listed separately at 14000 PSI.

Answer by: Customer Support on Feb 25, 2026, 6:26 AM

running 3/4 inch hydraulic lines on some equipment that sees pretty steady use, and i need to know if this hose can handle 3500 psi continuous or if that's more of a peak rating

Question by: Chad A on Jan 2, 2026, 6:07 AM

3500 PSI is the maximum operating pressure for this hose, and it holds a burst rating of 14,000 PSI, which gives you a 4:1 safety factor in line with standard hydraulic hose ratings. For steady, continuous use at or near that pressure ceiling, the hose is built for it. The double wire braid reinforcement is what carries that load, and the 600,000 impulse cycle rating backs up its durability under repeated pressure events rather than just static conditions.

Answer by: Customer Support on Jan 3, 2026, 11:37 AM

Will this hose hold up okay in a hydraulic system running at 3000 PSI?

Question by: Rex W on Apr 17, 2025, 1:48 PM

This double wire braid hose can handle up to 3500 PSI maximum operating pressure, so it should work fine for your 3000 PSI system.

Answer by: Customer Support on Apr 19, 2025, 6:53 AM

got a tight spot to route this line. how sharp can i bend that 3/4 hose without kinkin it?

Question by: Stan T on Mar 30, 2025, 1:43 PM

For routing, the minimum bend radius on this 0.75 inch ID SAE 100R16 Type S hose is 4.75 inches. Staying at or above that bend radius helps keep it from kinking and protects the reinforcement.

Answer by: Customer Support on Apr 1, 2025, 7:10 AM

hose rated for 3500 PSI but what's the burst pressure on it? trying to figure out if theres enough safety margin for our system

Question by: Jean H on Sep 11, 2025, 11:42 AM

Burst pressure on this one comes in at 14,000 PSI, which puts you at a 4:1 safety ratio over the working pressure of 3,500 PSI. That's a solid margin for most hydraulic service applications and meets standard industry expectations for double wire braid construction.

Answer by: Customer Support on Sep 12, 2025, 6:17 PM

Similar Products

Model Number	Hose I.D.	Hose O.D.	Maximum Operating Pressure	Burst Pressure	Minimum Bend Radius	Reel Qty (ft)
GH781-10R250	0.63	0.93	4000	16000	4	225-300
GH781-4R500	0.25	0.53	6500	26000	2	450-550
GH781-6R500	0.38	0.69	5300	21200	2.5	450-550
GH781-8R500	0.5	0.81	4500	18000	3.5	450-550
GH781-16R150	1	1.42	3000	12000	6	125-200
GH781-12R250	0.75	1.1	3500	14000	4.75	225-300
GH781-20	1.25	1.65	2500	10000	8.25	Rolls Only
GH781-24	1.5	2.03	2000	8000	10	Rolls Only
GH781-32	2	2.53	1600	6400	12.5	Rolls Only