Skip to the beginning of the images gallery

DG4V-5 Series Subplate/Manifold Mount NFPA Size D05 Solenoid Valve, 4-Way, 2-Position, Spring Offset, Up To 115VAC60Hz Coil. Three- or four-way directional control|Easily mountable on industry-standard surfaces|Thousands of models to suit all applications

Actuation Identification Solenoid B	Application Die casting & foundry, Machine tool, Marine/Offshore, Press, Primary metal, paper, Test equipment & simulation, Turbine control (wind, steam, water)	Body Material Gray Iron	Check Valve No	Coil Rating 115VAC60Hz	Design Code 20	Diode No	Brand Danfoss (Power Solutions II LLC)	Brand Danfoss Power Solutions	Pack Size 1.00	UOM EA	Features Three- or four-way directional control\|Easily mountable on industry-standard surfaces\|Thousands of models to suit all applications	Fluid Cleanliness 19/17/14 micron	Interface ISO4401-05	Leakage Standard	Manual Override Plain	Manual Override Option No	Performance Standard	Reducer Module No	Seal Material Buna-N	Special Features None	Spool Center Condition B Port End	Spool Monitor Switch None	Spring Arrangement A	Stage Single Stage	Supplier Part Number 639393	Switch Connector No	Tank Port Rating 160	Valve Mount Type Subplate/manifold mounted	Wattage 38	Product Weight 7.74 lbs	Alternate Part Numbers Alternate Part Number C1KK66, Alternate Part Number DG4V52AMUEK620

Product Questions & Answers 2

Product Questions & Answers

Will this Eaton Vickers valve work okay in a die casting machine setting?

Question by: Marvin R on Feb 18, 2026, 2:54 PM

This DG4V-5 series valve is definitely suitable for die casting and foundry applications, along with machine tools and marine/offshore environments.

Answer by: Customer Support on Feb 20, 2026, 7:12 AM

Running a press setup at 3500 PSI and need to know if this valve can hold up at that pressure without swapping out the subplate we already got on there.

Question by: Merle O on Jan 5, 2026, 5:41 PM

At 3500 PSI you are above the 3000 PSI threshold where the product data flags a required change. Ports P, A, and B are rated up to 4500 PSI, but anything over 3000 PSI requires a steel subplate or manifold. A standard or gray iron subplate will not meet spec at that pressure. If your current subplate is steel, you are fine. If it is not, that swap needs to happen before you run it at those levels.

Answer by: Customer Support on Jan 7, 2026, 7:03 AM

Similar Products

Part Number	Model Number	Coil Rating	Features	Price	Buy Now
639393	DG4V-5-2A-M-EK6-20	115VAC60Hz	Three- or four-way directional control\|Easily mountable on industry-standard surfaces\|Thousands of models to suit all applications