Skip to the beginning of the images gallery

DG4S4-01 Series Subplate/Manifold Mount NFPA Size D05 Solenoid Valve, 4-Way, 2-Position, Spring Offset End-to-End, Spool / Spring Code 2A, 110VAC50Hz 120VAC60Hz Lead wires Coil. Terminal Strip

Actuation Identification Solenoid B	Application Die casting & foundry, Machine tool, Marine/Offshore, Press, Primary metal, paper, Test equipment & simulation, Turbine control (wind, steam, water)	Body Material Gray Iron	Build Orientation Solenoid at B Port End	Check Valve No	Coil Rating 110VAC50Hz 120VAC60Hz	Coil Type Lead wires	Design Code 60	Diode No	Brand Danfoss (Power Solutions II LLC)	Brand Danfoss Power Solutions	Pack Size 1.00	UOM EA	Features Three- or four-way directional control\|Easily mountable on industry-standard surfaces\|Thousands of models to suit all applications	Fluid Cleanliness 19/17/14 micron	Interface ISO4401-AC-05-4-A/NFPA D05/CETOP 5/NG10	Leakage Standard	Manual Override Plain	Manual Override Option No	Performance Standard	Response Time 18-25 Milliseconds	Seal Material Buna-N	Special Features None	Spool Monitor Switch None	Spring Arrangement A	Stage Single Stage	Supplier Part Number 879260	Switch Connector No	Valve Mount Type Subplate/manifold mounted	Product Weight 9.87 lbs	Alternate Part Numbers Alternate Part Number C1HJ86, Alternate Part Number DG4S4WT012AB60

Product Questions & Answers 3

Product Questions & Answers

trying to swap out a D05 valve on a manifold, will this one bolt up the same?

Question by: Johnny W on Mar 24, 2026, 2:35 PM

It uses the ISO4401-AC-05-4-A interface, also called NFPA D05, CETOP 5, NG10. It is made for subplate or manifold mounting on those industry-standard surfaces.

Answer by: Customer Support on Mar 26, 2026, 12:41 PM

Reckon this valve will fit on my existing D05 manifold without any fuss?

Question by: Patty P on Aug 19, 2025, 6:17 PM

Installation should be straightforward, as it's designed to meet the ISO4401-AC-05-4-A/NFPA D05/CETOP 5/NG10 interface standards.

Answer by: Customer Support on Aug 21, 2025, 8:55 AM

running this on a press that sees some pretty heavy cycles -- does the 3600 PSI rating hold up at ports P, A, and B, or is there a catch somewhere?

Question by: Chad J on Aug 18, 2025, 7:21 PM

Ports P, A, and B are rated to 3600 PSI when running petroleum oil, but there is one condition worth knowing. Anything above 3000 PSI requires a steel subplate or manifold rather than a standard one. The tank port, port T, is rated separately at 1000 PSI regardless of fluid type. If you are running high water base fluids instead of petroleum oil, the pressure limit drops to 1000 PSI across the board on those work ports too.

Answer by: Customer Support on Aug 20, 2025, 6:07 AM

Similar Products

Part Number	Model Number	Coil Rating	Coil Type	Wiring Housing	Features
879260	DG4S4WT-012A-B-60	110VAC50Hz 120VAC60Hz	Lead wires	Yes	Three- or four-way directional control\|Easily mountable on industry-standard surfaces\|Thousands of models to suit all applications
879279	DG4S4-012A-U-B-60	110VAC50Hz 120VAC60Hz	DIN 43650	--	Three- or four-way directional control\|Easily mountable on industry-standard surfaces\|Thousands of models to suit all applications
879280	DG4S4-012A-U-D-60	220VAC50Hz 240VAC60Hz	DIN 43650	--	Three- or four-way directional control\|Easily mountable on industry-standard surfaces\|Thousands of models to suit all applications