Delta Series Geroler Motor, 33.10 cu in/rev, Wheel Mounting Flange, 1-1/4" Tapered Shaft, 7/8" O-Ring Ports, Standard, wheel or bearingless configurations|Lowest pressure drop motor in the industry|Highly-efficient Geroler motor provides energy savings

Fit comes down to the basics on this motor: it uses a wheel mounting flange, a 1-1/4 inch tapered shaft, and 7/8 inch SAE O-ring ports with .875-14 UNF-2B threads. If those three match what you’re swapping, you’re in the right neighborhood for mounting and hook-up.

This Delta Series motor is used in applications like scissor lifts, boom lifts, industrial sweepers, and mowers.

Rated at 994 newton metres of torque, this motor has plenty of muscle for scissor lift duty. The Geroler design also runs with the lowest pressure drop in its class, which means less heat buildup and more efficient use of your hydraulic system over the course of a shift. For break-in, run it at roughly 30% of rated pressure for about an hour before putting it under full load, and make sure it's filled with fluid before you ever apply any load to it.