Skip to the beginning of the images gallery

DA Series Tie Rod Hydraulic Cylinder, 1.50 Inch Bore, 0.75 Inch Rod Diameter, 6.00 Inch Stroke, 1/4 NPT Ports

Bore 1.50	Brand Midway Mfg Co	Brand Midway Mfg Co	Pack Size 1.00	UOM EA	Pin Diameter 0.63	Pin to Pin Extended 21.25	Pin to Pin Retracted 15.25	Ports 1/4 NPT	Ports 1/4 NPT	Rod Diameter 0.75	Stroke 6	Supplier Part Number 151024	Alternate Part Numbers Alternate Part Number C1AK80, Alternate Part Number DA-1506-75BBFN	Product Weight 10.70 lbs

Product Questions & Answers 2

Product Questions & Answers

trying to swap out an old tie-rod cylinder, what numbers do i need to match up so this one fits?

Question by: Dean W on Mar 14, 2026, 11:04 AM

The key dimensions on this cylinder are a 1.50 inch bore, 0.75 inch rod, and a 6.00 inch stroke, plus the mounting length. It measures 15.25 inches pin-to-pin when retracted and 21.25 inches pin-to-pin when fully extended, with a 0.625 inch pin diameter and 1/4 NPT ports.

Answer by: Customer Support on Mar 16, 2026, 7:46 AM

Will this cylinder fit in place of my existing one, assuming I match the bore and stroke?

Question by: Billy S on Feb 4, 2026, 8:58 AM

For replacement, make sure the pin-to-pin dimensions match your setup. Extended, this cylinder is 21.25 inches; retracted, it’s 15.25 inches. Also, double-check that the 1/4 NPT ports work with your existing hydraulic lines.

Answer by: Customer Support on Feb 5, 2026, 1:07 PM

Similar Products

Model Number	Bore	Stroke	Rod Diameter	Ports	Pin to Pin Retracted	Pin to Pin Extended	Pin Diameter
1504TR	1.5	4	0.75	1/4 NPT	13.25	17.25	0.625
1506TR	1.5	6	0.75	1/4 NPT	15.25	21.25	0.625
1508TR	1.5	8	0.75	1/4 NPT	17.25	25.25	0.625
1512TR	1.5	12	0.75	1/4 NPT	21.25	33.25	0.625