Skip to the beginning of the images gallery

DA Series Tie Rod Hydraulic Cylinder, 1.50 Inch Bore, 0.75 Inch Rod Diameter, 4.00 Inch Stroke, 1/4 NPT Ports

Bore 1.50	Brand Midway Mfg Co	Brand Midway Mfg Co	Pack Size 1.00	UOM EA	Pin Diameter 0.63	Pin to Pin Extended 17.25	Pin to Pin Retracted 13.25	Ports 1/4 NPT	Ports 1/4 NPT	Rod Diameter 0.75	Stroke 4	Supplier Part Number 1504TR	Alternate Part Numbers Alternate Part Number C1EG69	Product Weight 9.75 lbs

Product Questions & Answers 2

Product Questions & Answers

what's the pin-to-pin measurement on this cylinder when it's fully extended?

Question by: Pete P on Jun 7, 2025, 2:26 PM

Fully extended, the pin-to-pin distance on this cylinder is 17.25 inches. Retracted, it comes in at 13.25 inches. That 4-inch difference lines up with the listed stroke, so those numbers are consistent and reliable for planning your mounting setup.

Answer by: Customer Support on Jun 8, 2025, 5:50 PM

i’m swapping out an old tie-rod cylinder. are the main sizes on this one 1.5 bore, 3/4 rod, and a 4 inch stroke?

Question by: Billy H on May 3, 2025, 3:17 PM

For fit checks, the key dimensions on this cylinder are a 1.50 inch bore, 0.75 inch rod diameter, and a 4.00 inch stroke. It also uses 1/4 NPT ports, and the pin-to-pin length is 13.25 inches retracted and 17.25 inches extended.

Answer by: Customer Support on May 5, 2025, 6:52 AM

Similar Products

Model Number	Bore	Stroke	Rod Diameter	Ports	Pin to Pin Retracted	Pin to Pin Extended	Pin Diameter
1504TR	1.5	4	0.75	1/4 NPT	13.25	17.25	0.625
1506TR	1.5	6	0.75	1/4 NPT	15.25	21.25	0.625
1508TR	1.5	8	0.75	1/4 NPT	17.25	25.25	0.625
1512TR	1.5	12	0.75	1/4 NPT	21.25	33.25	0.625