Skip to the beginning of the images gallery

Brass Short Shank Type Fitting, 0.38 Inch Hose ID to 5/8-18 SAE 45 deg Flare, Straight

C 1.27	E 0.97	Brand Dixon Valve & Co	Brand Dixon Valve & Co	Pack Size 1.00	UOM EA	Finish No	Hose I.D. 0.38	Supplier Part Number 1440610K	Alternate Part Numbers Alternate Part Number C1FS81, Alternate Part Number MI-00362007, Alternate Part Number MINO-00056F96412	Product Weight 0.07 lbs

Product Questions & Answers 2

Product Questions & Answers

trying to swap out an old barb fitting, what hose size and thread does this one match up with?

Question by: Kurt B on Aug 1, 2025, 8:38 AM

It is made for a 3/8 inch hose ID on the barb side and a 5/8-18 SAE 45 degree flare thread on the other end, in a straight configuration.

Answer by: Customer Support on Aug 2, 2025, 8:12 PM

what thread size is on the female end of this fitting? need to make sure it'll mate up with my SAE flare connection before I order

Question by: Todd F on Oct 27, 2025, 9:05 AM

The female end runs a 5/8-18 thread and is built to connect with a SAE 45 degree flare. That's a standard -6 flare size, so if your mating fitting matches those specs, you're good to go.

Answer by: Customer Support on Oct 29, 2025, 6:03 AM

Similar Products

Model Number	Finish	Hose I.D.	Thread 1	C	E
143-0407	No	0.25	7/16-20	1.25	0.97
143-0408	No	0.25	1/2-20	1.31	0.97
143-0508	No	0.313	1/2-20	1.31	0.97
143-0612	No	0.375	3/4-16	1.34	0.97
143-0812	No	0.5	3/4-16	1.34	0.97
143-0814	No	0.5	7/8-14	1.34	0.97
144-0410	No	0.25	5/8-18	1.27	0.97
144-0510	No	0.313	5/8-18	1.27	0.97
144-0610	No	0.375	5/8-18	1.27	0.97