Bosflex Air & Water Transfer Hose, 1.15 Inch OD, 0.75 Inch ID, Up To 225.00 PSI

Crimp, swage, or interlocking clamp attachments are all suitable for this hose. Boss, ground joint, air hammer, and air king fittings are also good options to consider.

Minimum bend radius is 5.75 inches, so you will want to keep any turns at or above that to avoid kinking or stressing the hose.

Rated from -40°F up to +180°F, so it holds up through hard freezes and hot-season field work without a problem. The EPDM tube and cover handle that kind of swing pretty well for air and water transfer duties.

The inside diameter on this hose is 0.75 inches, so a standard 3/4 inch air line connection should mate up without needing any transition fittings. The outside diameter runs 1.15 inches, which is worth measuring against any clamps or guides you already have in place before you run the full length.

Inside diameter on this hose is 0.75 inch. The outside diameter is listed separately at 1.15 inch, so you are looking at a true 3/4 inch ID hose with a 1.15 inch OD.