Skip to the beginning of the images gallery

AQP Racing Stainless Steel Braid Hose, 0.88 Inch ID, Up to PSI

Adjustable End No	Brand Danfoss Power Solution (Aeroquip High Performance)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose Dash Size -16	Hose I.D. 0.88	Hose O.D. 1.15	Supplier Part Number FBA1600	Alternate Part Numbers Alternate Part Number C1CP63	Product Weight 1.63 lbs

Product Questions & Answers 5

Product Questions & Answers

What size is the inside of this hose?

Question by: Howard P on Feb 9, 2026, 6:55 AM

The inside diameter of this AQP racing hose is 0.88 inches.

Answer by: Customer Support on Feb 11, 2026, 6:06 AM

trying to match up a hose i’ve got now, is this one the -16 size and what’s the inside diameter on it

Question by: Phil P on Dec 26, 2025, 8:41 PM

It’s a -16 dash hose with a 0.88 inch inside diameter. The outside diameter is listed at 1.15 inches.

Answer by: Customer Support on Dec 28, 2025, 6:38 AM

what's the inside diameter on this hose, and is 0.88 inch a standard -16 dash size?

Question by: Denise M on May 28, 2025, 3:06 PM

For a -16 hose, 0.88 inch ID is exactly what you'd expect. That sizing lines up with standard dash size conventions, so if your fittings and ports are already spec'd for -16, this hose should drop right into your setup without any adapter headaches. The outside diameter runs 1.15 inch, which is worth confirming against any clamps or brackets you're routing through.

Answer by: Customer Support on May 30, 2025, 6:23 AM

What's the inside diameter on this hose? Just want to make sure it'll work for my setup.

Question by: Dwight S on Oct 21, 2025, 11:48 AM

The inside diameter of this AQP Racing Stainless Steel Braid Hose is 0.88 inches.

Answer by: Customer Support on Oct 22, 2025, 3:56 PM

what's the inside diameter on this hose? trying to figure out if it'll work for a -16 AN fitting setup i got going on

Question by: Rick J on Jun 23, 2025, 11:16 AM

The inside diameter on this hose is 0.88 inches, which lines up with a -16 AN sizing. It carries the Aeroquip catalog designation FC333-16, so if you're already working with -16 hardware in that product family, this is the right bore size to match up with it.

Answer by: Customer Support on Jun 24, 2025, 1:20 PM

Similar Products

Model Number	Hose Dash Size	Hose I.D.	Hose O.D.
FBA0400	-04	0.22	0.44
FBA0600	-06	0.34	0.55
FBA0800	-08	0.44	0.65
FBA1000	-10	0.56	0.8
FBA1200	-12	0.69	0.94
FBA1600	-16	0.88	1.15
FBA2000	-20	1.13	1.41