Skip to the beginning of the images gallery

AQP Hi-Impulse Double Wire Braid Blue SAE 100R2AT Hose, 0.50 Inch ID, Up To 4250.00 PSI

Abrasion Resistance 29	Application Hydraulics, crude, fuel and lubricating oils, gasoline, water and phosphate ester base hydraulic fluids.	Color Blue	Conductivity 30	Construction 2-ply braid	Cover Material Elastomer	Dash Size -8	Brand Danfoss Power Solutions (II LLC Aeroquip)	Brand Aeroquip	Pack Size 12.00	UOM FT	Hose I.D. 0.50	Hose O.D. 0.87	Impulse Cycle Life 400000 cycle	Lay Line Style Embossed	Maximum Operating Pressure 4250	Minimum Bend Radius 7.01	Minimum Bend Radius 7.01	Minimum Working Temperature -40	Reel Qty (ft) 300-390	Reinforcement Material High-tensile steel cords	Supplier Part Number GH195-8RL	Tube Material AQP Inner tube	Alternate Part Numbers Alternate Part Number C1CX40, Alternate Part Number GH195-08, Alternate Part Number GH195-8RL, Alternate Part Number MI-06163403, Alternate Part Number MINO-00015X00473	Product Weight 1.03 lbs

Product Questions & Answers 4

Product Questions & Answers

got a -8 line to replace, is this the one with the 1/2 inch inside size?

Question by: Johnny H on Sep 5, 2025, 12:54 PM

For dash size -8, this hose is a 0.50 inch I.D. (1/2 inch). It also lists a 0.87 inch O.D., which can help if you are checking clamp space or routing clearance.

Answer by: Customer Support on Sep 7, 2025, 6:41 AM

What kind of hydraulic fluids can I run through this hose?

Question by: Duane H on Mar 23, 2026, 12:51 PM

You can use this hose with petroleum-based fluids, fire-resistant hydraulic fluids, water-based hydraulic fluids, fuel, and lubricating oils.

Answer by: Customer Support on Mar 24, 2026, 1:52 PM

Running a double wire braid on our press line and need something that won't give out under sustained pressure. This one rated for continuous use at 4250 PSI or is that a peak number?

Question by: Lyle W on Jun 27, 2025, 8:51 AM

At 4250 PSI, that's the maximum operating pressure for this hose, and it holds that rating with a 2-ply steel braid construction throughout. The high-tensile steel cords are built into the reinforcement layer specifically to maintain integrity under demanding hydraulic service, not just momentary spikes. For a press line running sustained pressure, that construction is well suited to the load.

Answer by: Customer Support on Jun 28, 2025, 5:30 PM

trying to swap out a worn hose, is this one actually 1/2 inch inside diameter and the -8 size folks talk about

Question by: Dale A on Nov 29, 2025, 9:51 PM

You are looking at a 0.50 inch inside diameter hose in dash size -8. It’s built as an SAE 100R2AT style with a 2-ply wire braid, so it matches the common -8, 1/2 inch hydraulic hose size class.

Answer by: Customer Support on Dec 1, 2025, 2:22 PM

Similar Products

Model Number	Hose I.D.	Hose O.D.	Maximum Operating Pressure	Minimum Bend Radius	Reel Qty (ft)
GH195-6	0.38	0.75	5000	5	Rolls Only
GH195-8	0.5	0.87	4250	7.01	300-390
GH195-12	0.75	1.16	3000	9.49	180-240
GH195-20	1.25	1.92	2250	16.5	Rolls Only
GH195-4	0.25	0.6	5750	4.02	320-420
GH195-10	0.63	0.99	3250	7.99	240-310
GH195-16	1	1.49	2500	12.01	120-160