Alternate Part NumberC1HN41, Alternate Part Number MI-08703238, Alternate Part Number MINO-00925X88649
Application
Air brake systems except where temperatures exceed +200°F or where battery acid can drip on tubing. Not for fuel, water or oil.
Brand
Danfoss Power Solutions (II LLC Aeroquip)
Brand
Aeroquip
Pack Size
1.00
UOM
EA
End Gender 1
13553
End Gender 2
13556
End Gender 3
13557
End Size 1
0.38
End Size 2
0.38
End Size 3
0.38
End Type 1
Push to Connect
End Type 2
NPTF
Features
Dura-Kote plating for superior corrosion resistance|Design flexibility with hundreds of styles to choose from|Higher operating pressures above SAE standards
what's this fitting rated for exactly, can I run it on an air brake system year round?
Question by: Duane C on Oct 7, 2025, 4:14 PM
Air brake systems are the intended application for this fitting. One thing to keep in mind is the temperature ceiling. Once you get above 200 degrees Fahrenheit, it's outside the rated range. Battery acid contact is also a no-go, so routing matters if it's anywhere near the battery. Fuel, water, and oil lines are off the table entirely. For standard air brake use within those limits, it's built for the job. The brass construction and Dura-Kote plating hold up well against corrosion in typical service conditions.
Answer by: Customer Support on Oct 8, 2025, 9:11 PM
Will this work for brake lines?
Question by: Melvin M on Mar 26, 2025, 6:50 AM
Application-wise, this Eaton Aeroquip adapter is intended for air brake systems. Just keep in mind it's not suitable if temperatures exceed +200°F or where battery acid might drip on the tubing. Also, it's not for fuel, water, or oil lines.
Answer by: Customer Support on Mar 28, 2025, 7:46 AM
got a 3/8 push-to-connect air line, will this tee let me branch it off and still have a threaded connection on the run?
Question by: Shawn B on May 26, 2025, 8:38 PM
Function-wise, it is a swivel tee and Y style adapter that gives you two 3/8 inch push-to-connect ends and one 3/8 inch male NPTF end for the branch. All three ends are listed at 0.375, so it matches 3/8 tubing on the push-to-connect sides and a 3/8 male NPTF on the threaded side.
Answer by: Customer Support on May 28, 2025, 6:56 AM
