Skip to the beginning of the images gallery

1500M Series Gear Motor, 0.74 cu in/rev, 2-Bolt SAE A Mounting Flange, 5/8 St.Keyed x 2.00 Long Shaft, 3/4 NPT Rear Ports, Bi-Rot.

Displacement 0.74	Displacement 0.738	Brand CONTINENTAL HYDRAULICS INC	Brand Continental Hydraulics	Pack Size 1.00	UOM EA	Features Bi-Rotational, Shielded Outboard Bearing	Mount 2-Bolt SAE A	Mount 2-Bolt SAE A	Ports 3/4 NPT Rear Ports	Ports 3/4 NPT Rear Ports	Pressure Rating 2000	Rated Flow 5.80	Rated Flow 5.8	Rotation Bi-Rot.	Shaft 5/8 St.Keyed x 2.00 Long	Shaft 5/8 St.Keyed x 2.00 Long	Speed Rating 3600 RPM	Speed Rating 3600 RPM	Supplier Part Number 1506MC3E1BB	Alternate Part Numbers Alternate Part Number C1AK78	Product Weight 17.07 lbs

Product Questions & Answers 3

Product Questions & Answers

runs at 3600 RPM, but is that continuous or just a peak number for this motor?

Question by: Jean T on Aug 17, 2025, 7:32 AM

At 0.738 cubic inches per revolution, the rated speed for this unit tops out at 3600 RPM. That figure is based on anti-wear hydraulic fluid, so if you're running something different, the safe operating range could shift. Keeping your system filtered to 10 micron absolute will do the most to protect it at higher speeds and extend the life of the internal components.

Answer by: Customer Support on Aug 19, 2025, 6:46 AM

Will this gear motor work for a hydraulic log splitter?

Question by: Harold W on May 9, 2025, 10:51 AM

This 1500M Series gear motor is bi-rotational and has a 2-bolt SAE A mounting flange, so it could potentially work for a hydraulic log splitter, provided that it meets the system's pressure and flow requirements. It's rated for up to 2000 PSI. Make sure the specs align with your log splitter's needs.

Answer by: Customer Support on May 11, 2025, 10:34 AM

got a 2-bolt SAE A mount and need rear ports, is this one set up that way or am i lookin at the wrong motor

Question by: Gene C on Jul 15, 2025, 8:11 PM

It matches a 2-bolt SAE A mounting flange and it uses 3/4 NPT rear ports. The shaft is a 5/8 straight keyed style with a 2.00 inch length, so those three items are the main physical match points.

Answer by: Customer Support on Jul 17, 2025, 6:25 AM

Similar Products

Model Number	Displacement	Mount	Shaft	Ports	Features
1506MC3E1BB	0.738	2-Bolt SAE A	5/8 St.Keyed x 2.00 Long	3/4 NPT Rear Ports	Bi-Rotational, Shielded Outboard Bearing
1510MC3E1BB	1.18	2-Bolt SAE A	5/8 St.Keyed x 2.00 Long	3/4 NPT Rear Ports	Shielded Outboard Bearing
1512MC3E1BB	1.467	2-Bolt SAE A	5/8 St.Keyed x 2.00 Long	3/4 NPT Rear Ports	Bi-Rotational, Shielded Outboard Bearing